FAAC 620 Rapid Heavy Duty Hydraulic Barrier Operator 230V Residential, Commercial operation. Arm Sold Separately 10463282

FAAC 620 Rapid Heavy Duty Hydraulic Barrier Operator 230V Residential, Commercial operation. Arm Sold Separately 10463282

Call for price

ACCESSORIES & RELATED MODELS

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector. 10-30 VAC/VDC FEATURES: Enclosure: Impact resistant, high temperature plastic 1.75" x 2.375" x 3.61" Loop Size: Works with any in-ground inductive loop 20 - 1000nH Frequency: Automatically tunes t..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC 620 or 615 Beam Bracket for Rectangular Aluminum Beam (required)428342

FAAC 620 or 615 Beam Bracket for Rectangular Aluminum Beam (required)428342

For use with rectangular aluminum beams on the model 620 and 615 Barrier Gate Operator. (Included when order a barrier with arm)                                                                           ..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 620 13ft Aluminum. Beam Rectangular 428090

FAAC 620 13ft Aluminum. Beam Rectangular 428090

FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket.  Beams ordered separately will be assumed to be replacement beams only and will not include fixing bracket.  All aluminum beams measure 2in. x 4 in.  X length of  beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only. MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE: 428088 Alum. Beam Rect 8'1" 615/620 428078 Alum. Beam Round 8' 428089 Alum...

FAAC 620 Aluminum Beam Round 10ft Drilled for Breakaway428176

FAAC 620 Aluminum Beam Round 10ft Drilled for Breakaway428176

FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket.  Beams ordered separately will be assumed to be replacement beams only and will not include fixing bracket.  All aluminum beams measure 2in. x 4 in.  X length of  beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only. MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE: 428088 Alum. Beam Rect 8'1" 615/620 428078 Alum. Beam Round 8' 428089 Alum...

Click "Related" tab for more FAAC products

FAAC 620 Hydraulic Barrier Gate Opener
Speed and Versatility The 620 hydraulic barrier range is fast and reliable with a capability to support up to a 5m(13') beam. The 620 Standard with a duty cycle of 70% will support a 5m beam and bottom skirt with an opening/closing speed of 4 seconds. The 620 Rapid offers a beam length of up to 4m with an opening / closing speed of 2 seconds. The 620 Super Rapid will support a 3m beam and operate in 0.8 seconds. Long Term Reliability The 620 range is equipped with electronic slowdown at the end of the opening and closing cycle providing protection to the barrier mechanism. The 620 range is also available in stainless steel to offer higher corrosion protection for the most demanding environment. Use of cutting edge materials and treatments such as cataphoresis and niploy plus tried and tested FAAC hydraulic technology all combine to ensure long life.

FEATURES:

  • Continuous duty operation
  • Adjustable hydraulic pressures
  • 4 different operating logics
  • Pre-assembled counterbalancing system
  • Automated fan cooling
  • Pause time selections
  • Selectable warning light with logic
  • Quiet operation
  • Fast opening time (2 sec for 8.5 ft. beam)



 

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector. 10-30 VAC/VDC FEATURES: Enclosure: Impact resistant, high temperature plastic 1.75" x 2.375" x 3.61" Loop Size: Works with any in-ground inductive loop 20 - 1000nH Frequency: Automatically tunes t..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC 620 or 615 Beam Bracket for Rectangular Aluminum Beam (required)428342

FAAC 620 or 615 Beam Bracket for Rectangular Aluminum Beam (required)428342

For use with rectangular aluminum beams on the model 620 and 615 Barrier Gate Operator. (Included when order a barrier with arm)                                                                           ..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 620 13ft Aluminum. Beam Rectangular 428090

FAAC 620 13ft Aluminum. Beam Rectangular 428090

FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket.  Beams ordered separately will be assumed to be replacement beams only and will not include fixing bracket.  All aluminum beams measure 2in. x 4 in.  X length of  beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only. MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE: 428088 Alum. Beam Rect 8'1" 615/620 428078 Alum. Beam Round 8' 428089 Alum...

FAAC 620 Aluminum Beam Round 10ft Drilled for Breakaway428176

FAAC 620 Aluminum Beam Round 10ft Drilled for Breakaway428176

FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket.  Beams ordered separately will be assumed to be replacement beams only and will not include fixing bracket.  All aluminum beams measure 2in. x 4 in.  X length of  beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only. MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE: 428088 Alum. Beam Rect 8'1" 615/620 428078 Alum. Beam Round 8' 428089 Alum...

File Name Size Link
FAAC 640 and 620 Install Manual 1.21Mb download
FAAC Barrier Cutsheet 0.29Mb download
FAAC 620/ 640 Manual 1.26Mb download