FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

Call for price

ACCESSORIES & RELATED MODELS

FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC Three-Button Switch/Exterior Station 2510

FAAC Three-Button Switch/Exterior Station 2510

Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, clos..
Questions and estimates
FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..
Questions and estimates

SPECIFICATIONS:

  • Dimensions: 4" x .87" x 2.75"
  • 2 Relays
  • Relay A: Provides main detection output, modifiable by delay and extension
  • Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output
  • Frequency: Automatically tunes to 4 operating frequencies
  • Sensitivity: 10 settings to ensure detection of high bed vehicles
  • Connector: 10 position terminal block (no harness required)
  • Indicators: Separate power/fail and detect LEDs
  • Loop Size: Works on any in-ground inductive loop from 20 to 1000uH
  • Hold time: Normal or extended
  • Delay: Can be set to ignore fast-moving vehicles

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC Three-Button Switch/Exterior Station 2510

FAAC Three-Button Switch/Exterior Station 2510

Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, clos..
Questions and estimates
FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..
Questions and estimates