FAAC Warning Lamp/Visual Safety Strobe/Amber 115VAC 410013+

FAAC Warning Lamp/Visual Safety Strobe/Amber 115VAC 410013+

Call for price

ACCESSORIES & RELATED MODELS

FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..
Questions and estimates
FAAC Three-Button Switch/Exterior Station 2510

FAAC Three-Button Switch/Exterior Station 2510

Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, clos..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC Warning Lamp/Visual Safety Strobe/Amber 230VAC 410013

FAAC Warning Lamp/Visual Safety Strobe/Amber 230VAC 410013

FAAC Warning Lamp   PART NUMBER 410013 (230 VAC))   Connects to FAAC 230 VAC control panels; ..Amber light flashes while gate opens and closes Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in. (10 cm x 11.5 cm [14.2 cm] x 13 cm)..
Questions and estimates

FAAC Warning Lamp

 

PART NUMBER 410013 (230 VAC))

 

Connects to FAAC 230 VAC control panels;

..Amber light flashes while gate opens and closes

Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in.

(10 cm x 11.5 cm [14.2 cm] x 13 cm)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..
Questions and estimates
FAAC Three-Button Switch/Exterior Station 2510

FAAC Three-Button Switch/Exterior Station 2510

Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, clos..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC Warning Lamp/Visual Safety Strobe/Amber 230VAC 410013

FAAC Warning Lamp/Visual Safety Strobe/Amber 230VAC 410013

FAAC Warning Lamp   PART NUMBER 410013 (230 VAC))   Connects to FAAC 230 VAC control panels; ..Amber light flashes while gate opens and closes Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in. (10 cm x 11.5 cm [14.2 cm] x 13 cm)..
Questions and estimates