The Eagle-I Mini Board uses similar technology as the diamond board, with all the necessary features for residential applications with a lower cost. Control Board. The Unique Control Board uses state of the art technology combined with ease of use to provide many exceptional features not found in any other board 2 Wire Maser/Slave - The board
uses a unique Master/Slave system that requires only two wires. Outputs include on board 24 VDC for MAG Lock, alarm, and 24 VAC auxiliary
power.
Complete two-station intercom system, one master, one station, 12-volt power supply, one gooseneck, up to 1500', for gate operators.
Looking for a quality Entry System?
Linear’s Intercom System gives exceptional person-to-person communication between your entrance and your office or dwelling.
Controls are simple to use and let you unlock a gate or door with an electric release.
High quality microphones and speakers are separate to provide crystal clear sound.
The wall-mo..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
The D-TEK Vehicle Loop Detector (box only) was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.
Benefits include:
Easy installation
Works with small operator housings
Operates reliably with marginal loops
Metal housing provides maximum durability and RF blocking
Array of features and controls supports variety of applications.
Surge protection
Feat..
The Model MCT-11 1-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized transmitters.
The tra..
EAGLE Diamond Control Board.
This board is compatible with the Eagle-100, Eagle-1000, Eagle-200, Eagle-2000, Eagle-2000-APT and Eagle-OH operators.
With the state of the art Diamond control board, many of the advanced features you want are standard. The 8 feature selector switch will allow for easy installation and multiple capabilities like turning your transmitter into a 3 button station; click to open, click to stop and click to close. Heavy downhill applications can rely on the Motor B..
The MegaCode series of digital receivers are wireless radio controls designed for use with automatic gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes.
Features
Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1,000,000+ (MegaCode format)
RF freq..