Ramset 2200 Overhead Gate Operator Comm/Ind

Ramset 2200 Overhead Gate Operator Comm/Ind


Ramset 2200 Overhead Gate Operator Comm/Ind

Our RAM 2200 overhead gate operator is equipped with a 1 horsepower, 220 VAC, 4.5 amp 50/60 Hz, continuous duty motor, and high speed ball bearings and resettable overload button. The Ram 2200 can handle a gate up to 20 ft and 700 lbs. This overhead gate opener also features a heavy duty worm gear that is constantly bathed in oil for a smooth and whisper quiet operation. The RAM 2200 has a gold/zinc plated finish to inhibit corrosion as well as a high-impact resistant charcoal gray polyethylene cover to help keep it protected. The system includes a battery backup in case of power outages and will open the gate automatically when power fails completely. It also comes with an emergency release for easy manual opening and closing of the gate during power outages and emergencies.

RAM 2200 Specifications

  • Max Gate Length - 20 ft
  • Max Gate Weight - 700 lbs
  • Cycles - continuous
  • Capacitor - Aerovox 65µƒ, 240V, 50/60Hz. Protected S 1000AFC
  • Application - commercial / industrial
  • Finish / Construction - 10 ga gold / zinc plated
  • Motor - 1 HP, 220 VAC, 4.5 amp, 1625 rpm, 50/60Hz
  • Operating Temperature - -10 to 160 degrees F
  • Gate Travel Speed - 90 degree opening in 14 seconds
  • Power Failure Release - Pull down release
  • Chassis Base Dimensions - 17" W x 22 1/8" L
  • Overall Dimensions - 10" H x 143" L x 13" W


The RAM-2200 also features the new Intelligate control board. This control board features a state of the art microprocessor and comes packed with more options and functions than any other gate operator control board in the entire industry. The Intelligate control board features left / right hand switch adjustment, one pass (anti tailgating) technology, master / slave synchronization, an automatic timer, open and close delay, and many more features.

Ramset Intelligate Control Board Ramset Intelligate Control Board
The intelligate control board was designed to work in all Ramset model operators.It is a state-of-the-art microprocessor controlled PCB with more options and functions than any other gate operator control board in the industry. The control board is p...

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: