Liftmaster RSL12V 115VAC  Residential and Light Commercial Slide Gate Operator with Battery Backup, Solar Ready

Liftmaster RSL12V 115VAC Residential and Light Commercial Slide Gate Operator with Battery Backup, Solar Ready

Call for price

ACCESSORIES & RELATED MODELS

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Liftmaster / Chamberlain RSL12V Residential Slide Gate Opener (Previously RoboSlide)

The Liftmaster / Chamberlain RSL12V Residential Slide Gate Opener (also referred to as slide gate operator or slide gate motor) is a replacement for the Elite RoboSlide. It's Liftmaster's most advanced residential and light commercial pad mounted, and for gates up to 800 lbs. and 25 ft. in length. Up to 120 cycles per day. This model is solar-compatible and includes a built in 315MHz remote receiver. Use with Liftmaster / Chamberlain 300 series remotes.

For dual gate applications requiring 2 RSL12V Residential Slide Gate Operators to work together you will need to add part MSWIRE12GA6C Dual Gate Wiring Kit. This item can be easily found by entering the part number in the search box and then click "Search".

EverCharge Power Management System:
Leading the Industry with only 8mA power draw when idle including an "on board" radio receiver, this system delivers power when needed most for operating the gate while conserving power at all other times, resulting in more cycles when needed for battery backup or optional solar power.

Exceptional Standby Power:
Ten seconds after the gate closes, the system switches off non essential ancillary devices to conserve power. This is critical in the event AC power is lost as the battery backup system will remain operational for days or weeks depending on the daily cycle rate and power draw of accessories connected to the 12V accessory power output.

True Power Management System:
This Lift-master system will not only recover batteries quicker when discharged, it also manages the low power threshold and will not run the batteries beyond the point of failure ensuring they are ready for the next time they are needed.

FEATURES:
  • Heavy Duty 12VDC motor
  • On-board radio receiver - holds up to 50 remotes
  • Emergency Access Compliant - selectable auto open feature
  • External manual disconnect
  • Surge/spike protection
  • Inherent obstruction sensing
  • External obstruction sensing inputs
  • Electronic brake
  • Timer-to-close: 0-180 seconds
  • UV stabilized cover
  • Quantity 1) 7AH battery standard
  • 3-year warranty

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

File Name Size Link
LIftmaster RSL Wiring Diagram 1.16Mb download
LIftmaster RSL User Manual 2.32Mb download
LIftmaster RSL Install Manual 7.89Mb download
Ramset Jet Operator Install Manual 1.92Mb download
Magnetic MPS Motorized Swing Gates 2.03Mb download