Linear MDR/U: 1-Channel Plug-in Receiver- MEGACODE

Linear MDR/U: 1-Channel Plug-in Receiver- MEGACODE
Qty:

Linear MDR/U: 1-Channel Plug-in Receiver- MEGACODE

MDR/U: 1-Channel Plug-in Receiver

The Model MDR/U 1-Channel Plug-in Receiver is a versatile (universal) receiver that makes it very easy to equip nearly any garage door operator for use with Linear’s popular MegaCode format transmitters. MegaCode uses a frequency of 318 MHz and features over one million radio codes to all but eliminate any possibility of code duplication. It offers simplified programming via the receiver’s learn mode.

Previously, when installers wanted to add MegaCode capability to a garage door operator that did not come already outfitted with a MegaCode receiver, they had to use Linear’s MDR receiver in combination with a power transformer. The MDR/U replaces the MDR and plugs directly into any electrical outlet. All that is required is running a single two-conductor wire from the MDR/U to the operator’s push-button input.

The MDR/U has one normally open contact output. It can be used to send a remote control signal from up to 10 MegaCode transmitters. A learn mode dramatically simplifies programming to just a button press.

Features

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10%, 60 Hz
  • Codes: 1,000,000+ (MegaCode format)
  • RF frequency: 318 MHz
  • Dimensions: 2.52" W x 2.5" H x 1.61" D

Order number: DNR00100

Models compatible with the MDR/U
Model Description
LDO33 1/3 HP Standard Single Lamp Garage Door Operator
LDO50 1/2 HP Deluxe Single Lamp Garage Door Operator
LSO50 1/2 HP Deluxe Dual-Lamp Garage Door Operator
LCO75 3/4 HP Deluxe Dual Lamp Garage Door Operator

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: