Linear SWG 211 1/2hp 115V Commercial or Industrial Swing Gate Operator

Linear SWG 211 1/2hp 115V Commercial or Industrial Swing Gate Operator

SWG SERIES: Commercial or Industrial Swing Gate OperatorNow Includes APeX Controller!

The SWG Automatic Swing Gate operator is for Commercial and Industrial applications. This gate opener comes with a number of features mentioned below and has the options of a 1/2 hp. to a 1 hp. motor. You can get the SWG in a single or a three phase voltage system and has the capacity to add a number of accessories to make this automatic swing gate opener the perfect solution for you gate needs.

Let our customer service representative assist you in purchasing you SWG Commercial and Industrial Automatic Gate Opener when choosing the 208,230 and 460 3 phase operator.

CALL 775 588 1475 x 152 For Service and Assistance.

Ratings

• Maximum duty cycle: Continuous

*Please see table below for leaf weight and length formula.

Features

• Integral APeX Controller
• All voltages, single or three-phase
• Emergency disconnect
• Electrical power disconnect
• Emergency stop/reset button on front cover
• On-board APeX Controller three-button control station
• Master/second built in
• Durable powder coat finish
• Right hand - left hand convertible
• Timer to close
• Post mount standard; pad mount optional
• Powder coat finish
• ETL Listed for UL 325 (Class I-IV) for U.S. and Canada

Electrical

• Duplex receptacle on 115 VAC units
• AC and DC power available for access control accessories and reversing devices
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches

Mechanical

• Heavy-duty gate arm assembly with harmonic design for smoother starts and stops
• Over-center gate arm "locking" angle
• Heavy-duty 60:1 right-angle C-face gear reducer
• #40 roller chain and sprockets
• Adjustable torque limiter
• Heavy-duty pillow-block bearings

Factory Options

• Optional pad mount pedestal

Warranty

• 5 years

SWG Models

MODEL	HP	VOLTAGE & PHASE	DRIVE TYPE	MAX. GATE LENGTH	MAX. GATE WEIGHT	SECS. TO OPEN
SWG-211	1/2	115V 1P	Crank	18 FT.	700 LBS.	15 seconds
SWG-221		230V 1P
SWG-283		208V 3P
SWG-223		230V 3P
SWG-243		460V 3P
SWG-411	3/4	115V 1P		22 FT.	900 LBS.
SWG-421		230V 1P
SWG-483		208V 3P
SWG-423		230V 3P
SWG-443		460V 3P
SWG-111	1	115V 1P		26 FT.	1000 LBS.
SWG-121		230V 1P
SWG-183		208V 3P
SWG-123		230V 3P
SWG-143		460V 3P

 

	Linear 2520-031: Photo Eye with Reflector and Hood Photo eye with reflector and hood, 28-foot range, UL Listed   ...	$189.00
	Linear Replacement Apex Control Board 2500-2393   The Linear OSCO APeX Replacement Apex Control Board is designed to work with all of Linear's OSCO brand gate operators, and to replace current circuit boards with a new design that is simpler and sleeker, while also integrating betwee...	$468.13
	Linear AK-11 Exterior Digital Keypad ACP00748 The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast ...	$237.00
	Linear Plug in Loop Detector for Linear Apex Board   The Linear OSCO APeX Replacement Apex Control Board is designed to work with all of Linear's OSCO brand gate operators, and to replace current circuit boards with a new design that is simpler and sleeker, while also integrating betwee...	$182.58
	Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...	$144.84

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: