Part  #

Doorking Description

1838-065-C-7-04

Installation and programming instructions for series 1838 Multi-Door Access Controller with circuit board 1838-010, REV A and higher.

1818-065-H-4-02

Installation and programming instructions for series 1818 Multi-Door Access Controller with circuit board 1842-010, REV D and higher.

1520-065-C-5-02

Model 1520 Stand Alone Proximity Card Reader and Weigand Controller

1815-061-B-9-01

Wiring instructions for 1815-283, 1815-284 (AWID MR-1824 and  MR-1824MC) and 1815-383, 1815-384 (HID ProProx Plus and MaxiProx) Proximity Card Readers.

1812-165-A-5-01

Wiring instructions for 1812-037 12-Volt DC 1.0 A power transformer assembly.

1812-166-A-5-01

Wiring instructions for 1812-035 24-Volt DC 570 mA power transformer assembly.

Document #

Description

1503-065-C-5-02

Model 1503 and 1504 Basic Digital Keypad Installation and Programming Instructions.

1506-065-C-9-01

Model 1506 and 1504 Programmable Digital Keypad Installation and Programming Instructions for units with circuit board 1506-010 REV G and higher.

1506-066-A-9-01

Model 1506-081 Slave Keypad Installation Instructions.

1509-065-B-7-03

Model 1509 Digital Keypad Installation and Programming Instructions.

1815-064-B-10-03

Model 1815-050 and 1815-05 Weigand Output Keypad Installation and Programming Instructions.

Document #

Description

1514-060-C-9-03

Yagi High-Gain Antenna Installation Instructions

8056-065-D-12-03

Model 8056 MicroPLUS Rece iver Installation and Programming Instructions.

8057-065-A-2-01

Model 8057 MicroClik Receiver Installation and Programming Instructions.

8058-065-A-5-01

Model 8058 Amptenna™ Long Range Antenna Amplifier Installation Instructions.

Document #

Size

Description

9050-065-B-1-04

655 KB

Model 9050 and 9070 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with all 9050 and 9070 operators with circuit board 4702-010, Rev A and higher.

9100-065-C-1-04

679 KB

Model 9100 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with Model 9100 operators with circuit board 4602-010, Rev A and higher.

9150-065-C-1-04

685 KB

Model 9150 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with all Model 9150 operators with circuit board 4602-010, Rev A and higher.

9200-065-D-9-04

920 KB

Model 9200 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with all Model 9200 operators with circuit board 4402-010, Rev A and higher.

9300-065-C-6-03

755 KB

Model 9300 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with all Model 9300 operators with circuit board 4402-010, Rev A and higher.  NOTE:  This manual is not applicable to the newer style model 9310 operators.

9310-065-C-6-04

833 KB

Model 9310 Vehicular Slide Gate Operator Owner's Manual.  Use this manual with Model 9310 operators with circuit board 4403-010, Rev A and higher.  NOTE: This manual is not applicable to older style model 9300 operators.

Document #

Size

Description

6001-065-G-11-04

770 KB

Model 6002 Swing Gate Actuator Owner's Manual.  Use this manual with 6000 series actuators with circuit board 4302-010.

6050-065-C-7-01

507 KB

Model 6050 and 6100 Vehicular Swing Gate Operator Owner's Manual.  Use this manual with model 6050 and 6100 series operators with circuit board 4502-010.

6100-067-A-12-01

40 KB

Assembly instructions for model 6050/6100 pad mounting kit.

6300-065-C-7-01

535 KB

Model 6300 Vehicular Swing Gate Operator Owner's Manual.  Use this manual with model 6300 series operators with circuit board 4502-010.

6300-067-A-12-01

40 KB

Assembly instructions for model 6300 pad mounting kit.

6400-065-C-11-04

586 KB

Model 6400 Underground Swing Gate Operator Owner's Manual.  Use this manual with 6400 series operators with circuit board 4302-010.

Document #

Size

Description

1601-065-H-2-04

662 KB

Model 1601, 1602 Installation Manual.  Use this manual with operators that have circuit board 1601-010, Rev U or higher. installation notes

1601-065-J-11-04

532 KB

Model 1601, 1602 Installation Manual.  Use this manual with operators that have circuit board 1601-010 Rev V or higher. installation notes

1601-083-B-3-01

47 KB

Plastic arm folding kit installation instructions.

1601-084-C-3-01

28 KB

Wood arm folding kit installation instructions.

Document #

Size

Description

1150-065-A-7-01

355 KB

Model 1150 Vehicular Overhead Gate Operator Owner's Manual.  Use this manual with model 1150 series operators with circuit board 4401-010 Rev A or higher.

1150-066-C-10-04

127 KB

Model 1150 Vehicular Overhead Gate Operator assembly instructions.

Document #

Size

Description

1610-065-C-4-03

55 KB

Installation instructions for 1610-080 and 1610-081 traffic control spikes.

Document #

Size

Description

2000-065-D-4-04

391 KB

Model 2000 Inverter / Power Backup System Installation Manual

2340-065-F-4-04

718 KB

Supplemental Installation Manual for Gate Operators with Built-in Battery Backup System

Document #

Size

Description

9405-065-C-7-04

55 KB

Instructions for model 9405 and 9409 DUAL-CHANNEL plug-in loop detectors.

9406-065-B-7-04

46 KB

Instructions for model 9406 and 9410 SINGLE-CHANNEL plug-in loop detectors.

Loop Info G-3-02

197 KB

Loop and Loop Detector Information Manual.

Document #

Size

Description

1601-166-A-1-04

47 KB

Instructions for 1601-154 Heater kit.

1200-060-C-4-02

96 KB

Wiring instructions for 1200-006 and 1200-007 3-button control stations.