Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Call for price

ACCESSORIES & RELATED MODELS

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Application: Highways - Install under Asphalt Overlay or Embed in Concrete

The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete.

Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360” O.D. to resist the effects of reflective cracking that can occur in asphalt. 

Wire insulation and cable jackets are constructed with the optimal thickness of Crosslinked Polyethylene (XLPE) necessary to ensure a long, trouble free life. XLPE insulation provides excellent thermal, electrical, and physical properties and is recognized for its outstanding resistance to moisture and chemicals.

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

File Name Size Link
Reno Wire and Data Sheet 0.63Mb download
Reno PLH Instructions 0.12Mb download
Reno PLH Cutsheet 0.51Mb download
Reno General Saw Cut Instructions 0.06Mb download
Ramset Jet Operator Install Manual 1.92Mb download
Magnetic MPS Motorized Swing Gates 2.03Mb download

Tags: reno, plh-24-50-ra, preformed, loop, lead-in, corner), embeded, loops, renoplh-24-50-ra all-, loops/, detectors, , probes, , photoeyes, safety, edges,