Upswung B Package 1601/14ft/115V/DC BBU Battery Backup for 1or 2 way Gate for Parking lots, HOA's, RV Camps, Campgrounds and Commercial use. Battery Backup. Kit includes wireless receiver and transmitters, down loop, detector and a safety photo eye.

Upswung B Package 1601/14ft/115V/DC BBU Battery Backup for 1or 2 way Gate for Parking lots, HOA's, RV Camps, Campgrounds and Commercial use. Battery Backup. Kit includes wireless receiver and transmitters, down loop, detector and a safety photo eye.

Call for price

ACCESSORIES & RELATED MODELS

LInear MCT-11  1 Button: 1-Channel Visor Transmitter -MEGACODE

LInear MCT-11 1 Button: 1-Channel Visor Transmitter -MEGACODE

The Model MCT-11 1-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators. MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized transmitters. The tra..

Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Doorking Fan Kit for 1601 Barrier Gate Operators  1601-0932

Doorking Fan Kit for 1601 Barrier Gate Operators 1601-0932

DKS heater and fan kits allow Gate Operator systems to remain operating in cold environments.  Use if temperature routinely falls below 10°F (‐12°C). 1601‐154 Heater Kit Use this heater kit with the following models: 6050, 6100, 6300, 9050, 9100, 9150, 9000, 9310. 1601‐195 Heater Kit - 115 VAC Use this heater kit with the following model: 9210. 1601-197 Heater Kit - 208/230 VAC   Use this heater kit with the following models: 9210, 9220, ..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

Doorking  Lighted Traffic Signal and Mount Kit 1603-210

Doorking Lighted Traffic Signal and Mount Kit 1603-210

Click on the "Related Products" Tab Above for More Models Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage.   Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes. Traffic Signal R..

The 1601 operator is designed for single or double lane (14 ft. max for Double lane) vehicular traffic control in high traffic residential, commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.  The operator is equipped with a DC/BBU convenience open package that will automatically raise the arm in the event of a power outage.
Please click on the Downloads Tab for more information about the operator.


Doorking 1601 Barrier Gate Operator  Package for Medium to High Usage Operation with DC/BBU operation.
This exclusive package offered is excellent for low medium or high use operations in a residential(HOA)or commercial environment such industrial, campground, RV parks etc. The Doorking 1601 is an excellent choice for a traffic control device such as parking lots and lot/lane Entrance and Exit access control. The Boom Gate provided covers a 14ft roadway. Entrance and Exit your gate via 40 user wireless receiver with 2 radio transmitters for your vehicles. A Safety feature is provided with a simple "no wire" across the road Reflective Photo Eye. A simple sawcut vehicle down loop(asphalt or concrete only) with detector is provided to close the gate when traveling in or out.  Other products such as Automatic Exit Control, Keypad Entry, Telephone Intercom may be added. Add a 1601BBU to create a Dual setup.
Click on the Accessory Tab for more items or call for help or information at 1-775-588-1475 x 152.


This package includes:
1 DKS 1601 Barrier Operator 115vac/ DC BBU, White Cabinet ½hp for low,medium or high usage.
1 14ft aluminum boom/arm with all mounting hardware.
1 Wireless Radio Receiver, 40user, with 2  Transmitters/clickers for wireless opening and closing control.
1 Reflective style SAFETY Photo Eye.
1 Vehicle, in ground Downloop, Saw cut 4x8 with Detector

Please Click on ACCESSORIES TAB for more items to add to your kit.
Click on Related Tab to see more Products.

Specifications:
1/2 HP continuous-duty motor.

115, 230*, 460* VAC available.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

40:1 gear-box running in a continuous oil bath.

Arm rotates 90° in approximately 1.5 seconds.

Class II, III and IV applications.

Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

 

EMX NIR 30 Retro-Reflective Photoeye includes reflector Hood.

Photoeye Safety Set Reflective Style.  A 35ft distance Photoeye Infrared to prevent gate closure on cars or people. Usually mounted near the gate leaf(s) across the entrance side of the gates.  This eye is a transmitter/receiver all in one with no wiring necessary across your driveway. 

        

                                            

   
 

Linear MGR: 1-Channel Gate Receiver- MEGACODE - 40userLIN  Mega Wireless Receiver. This wireless radio receiver can handle up to 40 transmitters for your vehicle gate operation.  This receiver is offered in a 1 channel format only.
 

 

 

LInear MCT-11  1 Button: 1-Channel Visor Transmitter -MEGACODELIN 1 Button Transmitter.   A  1 Button Megacode transmitter with a modern design. Transmitter comes equipped with a visor clip.  This transmitter is to be used with the receiver displayed on this page. Please call if you would like to upgrade to a 3 button transmitter.

 

 

 

  Reno PLB Standard Vehicle loop.  The Reno PLB loop can be used for either a pour over or saw cut surface implant.  The loop comes with a 50ft lead.  This loop is not to be implanted in gravel or dirt pack operations. This loop must be accompanied with a Detector.
 



 

DKS 94 This loop detector from Doorking conveinently Plugs into the  control board on your DKS gate operators.  This is a 1 Channel 1 Relay Vehicle Detector.



.      

Memory
test 1 test

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
LInear MCT-11  1 Button: 1-Channel Visor Transmitter -MEGACODE

LInear MCT-11 1 Button: 1-Channel Visor Transmitter -MEGACODE

The Model MCT-11 1-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators. MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized transmitters. The tra..

Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Doorking Fan Kit for 1601 Barrier Gate Operators  1601-0932

Doorking Fan Kit for 1601 Barrier Gate Operators 1601-0932

DKS heater and fan kits allow Gate Operator systems to remain operating in cold environments.  Use if temperature routinely falls below 10°F (‐12°C). 1601‐154 Heater Kit Use this heater kit with the following models: 6050, 6100, 6300, 9050, 9100, 9150, 9000, 9310. 1601‐195 Heater Kit - 115 VAC Use this heater kit with the following model: 9210. 1601-197 Heater Kit - 208/230 VAC   Use this heater kit with the following models: 9210, 9220, ..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

Doorking  Lighted Traffic Signal and Mount Kit 1603-210

Doorking Lighted Traffic Signal and Mount Kit 1603-210

Click on the "Related Products" Tab Above for More Models Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage.   Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes. Traffic Signal R..

File Name Size Link
Doorking 1601 & 1602 Install Manual 7.11Mb download
Doorking 1601 Spec Brochure Spanish 0.21Mb download
Doorking 1601 Spec Brochure 0.50Mb download
Doorking 1602 Spec Brochure Spanish 0.21Mb download
Diagram- Barrier Gate Loop Layout 0.12Mb download

Tags: doorking, 1601-081, 1/2hp, 115v, barrier, gate, operator, operators, door1601-080 door1601080 (order, arm, and, hardware, kit, separately) all- 161601080 upswung, package 1601/148ft, boom, with, wireless, receiver, transmitters, safety, photo, eye.115v, high, use, hoa, residential, , camps, , commercial, industrialuse., packages-, openers 1601/14ft, down, loop 1601/14ft/115v, for, campgrounds, included forparking, lots, , garage loop, , detector 1601/14ft/115v/dc, bbu battery, backup/barrier 1or, way, backup., includes package-, hoa/, gated, community 161601081,