Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..
Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, clos..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
FAAC Warning Lamp PART NUMBER 410013 (230 VAC)) Connects to FAAC 230 VAC control panels; ..Amber light flashes while gate opens and closes Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in. (10 cm x 11.5 cm [14.2 cm] x 13 cm)..
FAAC Warning Lamp
PART NUMBER 410013 (230 VAC))
Connects to FAAC 230 VAC control panels;
..Amber light flashes while gate opens and closes
Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in.
(10 cm x 11.5 cm [14.2 cm] x 13 cm)
There are no reviews for this product.